Catherine's Wheel

 I posted December 17, 2020 about making an ornament which is called prairie wheel (USA) or Catherine's Wheel (UK).  The latter being of more historical significance.  It is named for the patron saint Catherine from the 4th century who was tortured for not renouncing her Christian religion.  She is the patron saint for students, preachers, philosophers, as well as single women.  I digress.

In this post, I am revisiting the Catherine's wheel and how to make the ornaments. First thing to do is decide on the color scheme you want.  It can look scrappy, or use one color, two colors...whatever you have on hand is fine.  The middle of the wheel is a small pillow that measures 3" in diameter and will be entirely covered, so it will not matter what fabric or color you use for this.  Muslin works great and is easy to sew through.  You will need:

12 - 2.5" squares of prints, solids, or combo of both

2 - 3" circles of muslin, or a center pillow

Poly-fil or scraps of batting for pillow stuffing

Strong thread (I use button thread)

Buttons, beads, or trims for the centers of each wheel

DMC floss or Perle cotton for a hanger

Hot glue and glue gun (optional)

Size 6 or 7 sharps needle, small scissors, thimble, sewing machine (optional)

Sew the circles together using a 1/4" seam allowance and a long thread (about 30").  Make a small slit through one of the center circles, turn and stuff.  Stitch the opening closed make a couple stitched through the pillow and make a knot but do not cut off.  

Fold one 2.5" square at a time.  Fold in half on the diagonal, then again on the diagonal, and once again on the diagonal.  All the raw edges should be aligned on one edge. 

Straddle the resulting triangle over the edge of the center pillow and draw the thread through the points that come together in the center on the front and back.  Do not cut the thread.  Continue with the next spoke in the same way.  Mix or match your color choices as you go around the wheel.  Gently tug and separate each spoke as you go making a tacking stitch through the center.  When you come to the end you can do one of two things.  Make a secure knot and cut the thread or sew on your embellishment, then tie off.  If you cut the thread before embellishing, this is where you will glue on your buttons, beads or trims.  You can also use a tiny bit of glue inside the spoke to secure it to the top inside of the pillow.  In a couple places, this can be quite effective in keeping its integrity. 

 The final thing to do is to add a thread or ribbon trim to hang it from.

Viola!  You're done.  Honestly, I do this while watching TV and can make several in an hours time, and what a great project to use up those scraps or strays from jelly rolls.  :o)  Happy Sewing!